New simple and intuitive color LCD display

EVO LIFT function that allows to control the thermal contribution and to support the electrode in the exact position of the point, thus avoiding the oxidation of the piece

EVO START function to optimize edge bonding

TIG APC (Active Power Control) welding process that guarantees greater penetration, greater arc stability, no adherence of the electrode to the workpiece, adaptation of the arc to the welding conditions through the simple movement of the torch

AC + DC TIG welding process suitable for welding aluminum and its alloys, with the DC component more penetrating and faster welds are obtained in the process, with less deformation of the manufactured part

Intermittent function (pause time welding) for whiter welds and time regulation in hundredths of a second

Pulsed function adjustable up to 2.5 kHz

EXtra Pulse (XP) welding process: extremely high frequency pulsing for small gauges requiring minimal heat transfer

Possibility of combining a low frequency pulsation to the XP process to improve penetration and welding speed in medium and small thicknesses.

JOB function, to memorize up to 9 welding programs

Wiz function, so the operator can quickly make selections based on the desired welding process

MMA AC welding process suitable for the welding of electrodes on magnetized sheets, avoiding the “magnetic blow” in the welding of hollow structures, normally used for maintenance work

The generator can be powered by motor generators of adequate power (min. 8 KVA)

Prepared for cooling equipment