EJECTOR S/XL 80 7.98x130 (IN 2 PIECES) - KARNASCH 201427
REF: 682201427
Pack of 2. The price indicated is for a pack of 2.
USE:
Insert the workpiece (1) into the shank of the core drill.
Push the workpiece (2) onto the workpiece (1). Drill to 50 mm cutting depth. Then remove the workpiece (2) and continue drilling.
Why use 2-piece ejector pins?
Normally, standard Morse taper holders have a cutting depth capacity of 50 mm. If extra long holders are not used [see items 201842, 201291, 201843, 201845, 201846], for cutting depths greater than 50 mm, 2-piece ejector pins are required.
