SYNSTAR 400 TS

REF: 571382

This three-phase inverter generator has a new hardware architecture that offers high performance while maintaining low consumption. It is characterized by its resistant hermetic structure of pre-galvanized steel and the cooling with forced air from the fans inside the cooling tunnel.

It has the processes of PUSHED and DOUBLE PUSHED (double current level). In addition to welding programs for wires (ø 0.8 mm / ø 1.0 mm / ø 1.2 mm / ø 1.6 mm) and synergic programs for stainless steel and aluminium.< /p>

The 5” touch display allows you to configure: arc length, type of process, welding mode (2 times or 4 times), tack time, pause time, impedance, push-pull force, burnback, soft start, pregas and postgas. It incorporates USB and RS 232 ports for firmware updates.

 

Characteristics: 

  • Model: 400 TS
  • Series: SYNSTAR
  • Use: MIG, MAG, MMA
  • Power supply: 400 V
  • Power: 17.5 kVA
  • Max current (10 min. 40°C): 400 A at 100%
  • Consumables: Electrodes Ø 1.5÷ 6.0 mm
  • Dimensions: 527 x 1078 x 1398 mm
  • Weight: 111 kg

Consult

Any questions? Contact Us

Related Products

Welding SYNSTAR 350 TS
Welding SYNSTAR 500 TS